The resin grinding disc is a kind of sintered with resin glue and grinding powder. It is used for thinning and fine grinding of some products in the grinding industry. Generally, it can be used for stainless steel, ceramics, silicon plastic, glass and various metals.
flap disc manufacturer,flap wheel factory,grinding disc,zirconia sanding belt
The process of making the resin abrasive disc is very important. It can't be sloppy, the ratio of resin glue, the hardness of the resin glue, and the concentration are very important. There is also grinding powder. The grinding powder is based on the material of the product you want to grind. Mainly depends on the hardness of your grinding products. If some stainless steel is coarsely ground, then we can choose some coarse grinding powder. The grinding material is soft. We use some fine powder, the proportion of grinding powder is also the resin. The proportion of glue is the same, and there must be an accurate ratio. If the grinding disc is not sintered in the proportion of the specification, it is not used.